#AIS372 Plastic Siphon Pump, Plastic Siphon Drum Pump,

 55 Gallon Drum Plastic Siphon Pump May be used in 55 gallon, 30 gallon and 15-20 gallon drums

The AIS372 Plastic Siphon Drum Pump should be used in liquids with a  maximum fluid temperature of 140˚F  or 60˚C. 

The Maximum viscosity of the fluid to be transferred is 500 SSU. (like 85 W Gear Lube).  Plastic Siphon Drum Pumps wetted parts

are polyethylene with a maximum flow rate of 7 Gallons Per Minute.   Plastic Siphon Drum Pumps mount into the 2" Male NPT opening of most 55 gallon drums or Drums with a Bung Adapter, Plastic Siphon Drum Pumps work in smaller drums (15 gallon, 30-35 gallon drums) just cut suction tube at a angle to fit to bottom of the drum of your choice.  Plastic Siphon Drum Pumps have a suction tube with inside diameter of 11/16" and outside diameter of 3/4" and the length of the suction tube is 34" that can be cut for shorter drums or containers.   The plastic siphon drum pump has a discharge hose that is 15/16" inside diameter and the outside diameter is 1-1/16" and the length of the hose is 48".    Plastic siphon pumps have a red cap air vent that controls siphoning.   Plastic Siphon Pumps will pump to higher levels and siphons to lower levels.  Open red air vent cap to stop siphoning.  Quick action pump, easily fills or empties kerosene, light oils, gasoline, mild acids, mild alkaline soaps, detergents and various water-based solvents.

Americas Industrial Supply Online          Main Pump Page    

For Information on Pumps email sales@americasindustrialsupply.com      Call 1-800-916-5027 or 1-801-295-3499