AISP-490S Lever Action Drum Pump
Material: Polypropylene body, PP telescopic tube, 316 Stainless steel rod, PE piston, PP spout. Application: Same as P-490, plus water based chemicals, acid and alkaline solutions.
AISP-490 Lever Action Drum Pump
Material: Polypropylene body, PP telescopic tube, steel rod, PE piston, PP spout. Application: Water, alcohol, gasoline, diesel, kerosene, lubricant etc.
AISR-490S Lever Action Drum Pump
Material: With Ryton body and telescopic tube, 316S rod, PolyPropylene piston, PolyPropylene spout. Application: acid and alkaline solutions, alcohol, diesel fuel, gasoline, kerosene, lubricant, strong acid and alkaline solutions nitric acid, water based chemical.
AISR-490ST same as above with Teflon piston
With Teflon seal, Teflon vane, Poly Propylene spout, Poly Propylene suction tube. Application liquids: Acid, alkali, alcohol, diesel fuel, gasoline, machine oil, water. Dispenses approximately 1 gallon for 16 revolutions.
Economy Rotary Drum Pump - fits 15 through 55-gallon drums with 2" NTP bung opening. Dispenses gasoline, diesel fuel, ATF, Light oils, and hydraulic oil. Heavy-duty cast iron body with 3 piece steel suction tube Dispenses approximately 7-1/2 gallons per 100 revolutions.
AIS961 Steel Rotary Pump with #AIS2178 Hose & #AIS53 Holster
Economy Rotary Drum Pump - fits 15 through 55-gallon drums with 2" NTP bung opening. Dispenses gasoline, diesel fuel, ATF, Light oils, and hydraulic oil. Heavy-duty cast iron body with 3 piece steel suction tube 3/4 inch threaded discharge spout (M). Includes MODEL AIS2178 hose assembly and MODEL AIS53 holster. Dispenses approximately 7-1/2 gallons per 100 revolutions.
AISRP-90RT
Rotary Drum Pump #10256
With Teflon seal, Teflon vane, Ryton suction tube.
With Teflon seal, Teflon vane, Ryton spout.
Application liquids: acid, alkali, gasoline, diesel, machine oil, water, alcohol, thinner, and other chemical liquids. Resists nitric acid with concentration of up to 20%
With HDPE, Teflon vane, HDPE spout, HDPE suction tube, Polyethylene flange seals, Viton shaft seal. Application liquids: Bleach, chlorine, water and other chemicals compatible with HDPE. For industrial use. Dispenses approximately 1 gallon for 16 revolutions.
AIS372 HDPE Plastic Siphon Drum Pump
Quick action siphon drum pump, easily fills or empties, acids, alkali products, water based soaps and detergents, citrus d-limonene, citrus solvents, kerosene, light oils, gasoline and various water-based solvents. Air vent controls siphoning. Pumps to higher levels and siphons to lower levels. Maximum Fluid Temperature: 140˚F, Flow: 7 GPM, Wetted Parts: Polyethylene, Mounting: 2" Male NPT, Suction Tube ID/OD: 7/8" / 1" , Suction Tube Length: 34" , Discharge Tube ID/OD: 15/16" / 1-1/16" Discharge Tube Length: 48"
Nylon Drum Pump w/o hose - fits 15 through 55-gallon drums with 2" bung opening. Constructed of nylon, stainless steel, and special packing. Can be used with some stronger chemicals and solvents, such as lacquer thinner, Brake Cleaners, and Acetone. Also suitable for edible products such as cooking oils. Includes bung adapter and discharge spout. Spout can be removed and special hose attached. Dispenses approximately 14 oz. per stroke. Hose ordered separately. (AIS2134 4' length or AIS2136 6' length)
Polypropylene Drum Pump w/o hose - fits 15 through 55-gallon drums with 2" bung opening. Constructed of polypropylene and nickel plated steel. Can be used with weak acids, anti-freeze, some mild chemicals and detergents. Includes bung adapter and discharge spout. Spout can be removed and special hose attached. Dispenses approximately 14 oz. per stroke. Hose ordered separately. (AIS2134 4' length or AIS2136 6' length)
Nylon Drum Pump w/o hose - fits 15 through 55-gallon drums with 2" bung opening. Constructed of nylon and nickel plated steel. Can be used with paint thinners and general solvents. Includes bung adapter and discharge spout. Spout can be removed and special hose attached. Dispenses approximately 14 oz. per stroke. Hose ordered separately. (AIS2134 4' length or AIS2136 6' length)
AIS10193 Stainless Steel Drum Pump
Stainless steel lever action pump for 2” bung opening. 10 oz. per stroke capacity. Features a stainless steel body with teflon seals. Removable discharge spout to attach ¾” NPT hose (hose not included). Use for mild acids, detergents, anti-freeze, windshield washer fluid. Hose ordered separately. (AIS2156 6 ' length or AIS2158 8 ' length)
AIS385 Stainless Steel Drum Pump
Stainless steel lift pump for 2” bung opening. 22 oz. per stroke capacity. Pump has stainless steel piston rod with a viton seal. Use for pumping mild acids, anti-freeze, detergents and other mild chemicals. Removable discharge spout to attach ¾” NPT hose (hose not included).
Hose ordered separately. (AIS2156 6 ' length or AIS2158 8 ' length)
Zinc Plate metal lift pump for dispensing soaps, detergents, antifreeze, windshield fluids, oils and other non corrosive products. Delivers 16 oz per lift. Spout may be removed to garden hose attachment. Hose ordered separately. (hose # AIS88 is a 8' hose & AIS36 is a 5' hose)
AIS10140 Stainless Steel Drum Pump
Stainless steel Lift pump for dispensing mild acids, detergents, antifreeze, windshield fluids, MEK, chlorinated solvents, and acetone. 316 stainless steel construction. Delivers 16 oz per lift. Spout may be removed to garden hose attachment. Hose ordered separately. (hose # AIS88 is a 8' hose & AIS36 is a 5' hose)
AIS10110 Stainless Steel Drum Pump
Stainless steel Lift pump for dispensing mild acids, detergents, antifreeze, windshield fluids, MEK, chlorinated solvents, and acetone. 316 stainless steel construction. Delivers 8 oz per lift.
Zinc Plate metal lift pump for dispensing soaps, detergents, antifreeze, windshield fluids, oils and other non corrosive products. Delivers 8 oz per lift.
This Pail pump is an economical chrome plated steel pump with polyethylene internal parts used as a mild soap pump, wax pump, paint thinner pump, etc. For 5 - 6.5 gallon pails.
Lever Handle Metal Pump for High Viscosity Liquids. An easily operated metal pump with die-cast Zinc alloy body, ideal for high viscosity liquids such as paraffin, gear oil, etc. Suction Tube telescopes to fit various containers. Includes curved spout and high angle spout. Dispenses approximately 1 gallon per 8 strokes. Fits 15 to 55 gallon drums and other containers with a 2"NPT opening.
Plastic Drum Pump with Pail Adapter Fits both 3/4 and 2 openings. Includes one pail adapter that snaps onto 5 gallon pails. Pumps 8 oz. per stroke. Pump fits 15 30 and 55 gallon drums.
Barrel Pump w/o hose - fits 15 through 55-gallon drums with 2" bung opening. Has zinc die-cast piston with brass piston ring. Includes bung adapter and curved discharge spout. Discharge spout can be rotated 180 ° and can be removed to expose garden hose threaded outlet. (hose # AIS88 is a 8' hose & AIS36 is a 5' hose) Dispenses approximately 1-1/2 pints per stroke.
AIS366T Barrel Pump For Lacquer Thinner
Barrel Pump w/o hose - fits 15 through 55-gallon drums with 2" bung opening. Has zinc die-cast piston with brass piston ring. Includes bung adapter and curved discharge spout. This barrel pump has lacquer thinner rod packing. Discharge spout can be rotated 180 ° and can be removed to expose garden hose threaded outlet. (hose # AIS88 is a 8' hose & AIS36 is a 5' hose) Dispenses approximately 1-1/2 pints per stroke.
AIS11219 Stainless Steel Rotary Drum Pump
Stainless Steel Rotary Pump For pumping Fuels and Harsh
Chemicals,
Stainless Steel construction
Teflon
vanes and shaft seal, Stainless Steel springs,
3 pcs
Stainless Steel pickup tube, 3/4”
Hose barb on spout, Aluminum
handle, Rubber water deflector, Stainless
Steel bung adapter, Stainless Steel hardware
Hand Pump - fits 5 through 6 1/2 gallon pails. Features a 48" vinyl discharge hose with curved metal spout at the discharge end, steel suction tube with plastic extension, standard bung adapter for external threads, special bung adapter for Rieke spout, and drain back for curved metal spout with standard bung adapter. Dispenses approximately 1 quart per 15 strokes.
Transfer/Suction Pump - hand operated pump for transferring liquids from one container to another. Has 8’ of clear vinyl hose. Double check valve permits drawing of liquids from a container and discharging into another. Has Viton® O-Ring.
Hand operated diaphragm pump for dispensing gasoline and diesel fuel from 15 to 55 gallon drums. Includes bung adapter, manual nozzle, 8 ft. hose assembly with static wire, 22" to 39" telescoping suction tube with foot valve, and lockable handle.
AIS36 5' length or AIS88 8' length
Garden Hose End. ¾” I.D. clear vinyl hose coupled on one end with a Garden Hose thread
AIS2156 6' length or AIS2158 8' length
Rotary Pump Hose. 6' or 8' of 3/4 inch clear vinyl tubing coupled on one end with 3/4 inch NPT (F).
Plug Wrench - non-sparking aluminum wrench for use with 2" and ¾” drum plugs
AIS151 Thread Adapter for Plastic Drums
Buttress Thread Adapter for plastic drums with buttress thread for 2" openings. 2" NPT (F) inlet, 2" buttress (M) outlet. Nylon.
AIS2134 Plastic Pump Hose. 4' X ¾” I.D. clear vinyl hose coupled on one end with a special thread (F) fitting and on the other with a discharge nozzle. For use with MODEL AIS360, AIS363 and AIS365 plastic pumps.
AIS2136 Same as above only 6' long .
accessories